Create a Stunning Gemstone Lotus Bracelet with Beadaholique

Create a Stunning Gemstone Lotus Bracelet with Beadaholique

Table of Contents

1. Introduction
2. Materials Needed
3. Step 1: Preparing the Wire
4. Step 2: Stringing the Beads
5. Step 3: Adjusting the Length
6. Step 4: Finishing the Bracelet
7. Step 5: Adding the Charm
8. Conclusion

Introduction

In this article, we will guide you through the process of creating a beautiful gemstone bracelet using the Lotus gemstone bracelet kit from Beadaholique. This kit comes with all the materials you need, including gemstone beads, wood beads, metal beads, a metal bail, jump rings, a lobster clasp, wire protectors, crimp covers, crimp tubes, and a Lotus charm. We will provide you with step-by-step instructions on how to create this bracelet, as well as tips and variations to customize the length. Let's get started!

Materials Needed

Before we begin, let's gather all the materials we will need for this project. For the Lotus gemstone bracelet kit, you will need the following:

• Gemstone beads
• Wood beads
• Metal beads
• Metal bail
• Jump rings (open and closed)
• Lobster clasp
• Wire protectors
• Crimp covers
• Crimp tubes
• Lotus charm
• Wire (included in the kit)
• Tools: bead stopper, chain nose pliers, flush cutters, crimping pliers, ruler

Step 1: Preparing the Wire

To start, open up the wire included in the kit and uncoil it. You will have about a foot of wire. Place a bead stopper about two inches from one end of the wire to prevent the beads from falling off. This will be the starting point for stringing the beads.

Step 2: Stringing the Beads

Begin by stringing one metal bead, one wood bead, one metal bead, and then three gemstone beads. Repeat this pattern until you reach the desired length for your bracelet. You can adjust the length by omitting a wood bead if needed. Make sure to end with a metal bead.

Step 3: Adjusting the Length

Measure the length of your bracelet using a ruler. The recommended length for this design is just over seven and a half inches. If the bracelet is too long, you can remove one wood bead and one metal bead from each end. If it's too short, you can add another wood bead and metal bead to each side respectively. The bead stopper allows you to make adjustments without having to unstring the entire bracelet.

Step 4: Finishing the Bracelet

Once you're happy with the length, it's time to finish the bracelet. Slide a crimp tube onto the wire and position it close to the last bead. Then, thread the wire through one side of a wire protector, go up and over, and thread it back down through the other side. Before returning the wire through the crimp tube, thread a closed jump ring onto the wire to serve as the clasp. Adjust the position of the crimp tube to leave a small gap between the wire protector and the tube. Use crimping pliers to secure the crimp tube by first placing it in the notch closest to the plier's base, then rotating it 90 degrees and placing it in the second notch. This will create a secure crimp.

Step 5: Adding the Charm

To complete the bracelet, open a jump ring and thread it through the loop of the Lotus charm. Then, attach the jump ring to the bail on the bracelet. Ensure that the jump ring is closed securely. Your Lotus gemstone bracelet is now ready to be worn!

Conclusion

Creating your own gemstone bracelet using the Lotus gemstone bracelet kit from Beadaholique is a fun and rewarding project. With the step-by-step instructions provided in this article, you can easily make a beautiful bracelet that suits your style. Feel free to experiment with different bead combinations and lengths to create unique variations. Have fun crafting!

Highlights

• The Lotus gemstone bracelet kit from Beadaholique includes all the materials needed to create a beautiful bracelet.
• Step-by-step instructions are provided to guide you through the process of making the bracelet.
• The length of the bracelet can be adjusted by adding or removing wood and metal beads.
• The finishing technique involves using wire protectors, crimp tubes, and crimp covers for a professional look.
• A Lotus charm is included in the kit to add a special touch to the bracelet.

FAQ

Q: Can I use different gemstone beads for this bracelet? A: Yes! You can customize the bracelet by using your favorite gemstone beads or mixing different types of gemstones.

Q: Can I make the bracelet longer or shorter than the recommended length? A: Absolutely! The recommended length is just a guideline. You can adjust the length to fit your wrist perfectly.

Q: Can I use different charms instead of the Lotus charm? A: Of course! Feel free to swap out the Lotus charm with any other charm that you prefer.

Q: Can I make multiple bracelets using one kit? A: Yes, depending on the length of each bracelet and the number of beads used, you may be able to make multiple bracelets from one kit.